How To Install Windows 10 On Linux

Download Article

Download Commodity

This wikiHow teaches you how to install Windows 10 on a PC that's already running Ubuntu Linux. Earlier you get started, make sure you've already purchased a Windows license and product key. Don't worry if yous don't have Windows install media, as you can create a bootable USB drive from a downloadable ISO epitome. In one case y'all've installed Windows, y'all tin install a tool called EasyBCD that allows yous to switch betwixt operating systems at reboot time.

1
Install Gparted if you haven't already. Gparted is a complimentary partition tool with a graphical user interface that's pretty easy to use. You tin download information technology from the Software Center or by running sudo apt-get install gparted from the command line.
- If you lot've already created a partitioning for Windows only it'southward not a Chief Partition, you'll take to create a new one.^[1]
2

Open up Gparted. You'll see a listing of all drives and partitions.

Advertisement
3

Correct-click the partitioning or drive y'all desire to edit and select Resize/Movement . This allows you to create a new sectionalisation from an existing one.
4

Enter the new division size (in MB) into the "Complimentary space following" blank. Y'all should allocate at least 20 GB (20000 MB) for Windows 10. If yous plan to install apps and utilise Windows regularly, yous'll probably desire to increment that amount.^[2]
v

Select Chief Partition from the "Create as" menu. It's on the right side of the window.
half-dozen

Select ntfs from the "File Arrangement" menu. It'south on the right side of the window.
7

Type Windows10 into the "Characterization" field. This is merely and so y'all tin hands identify the partition.
8

Click Add . It'southward at the bottom-right corner of the window.
ix

Click the light-green check mark button. It's in the toolbar at the top of Gparted. This creates the partition, which may take a picayune while. When the partition is prepare, click Close at the bottom-correct corner of the window.

Ad

1
Install UNetbootin from the Software Center. This is a free application that lets you create a bootable USB drive in Ubuntu. To acquire more about UNetbootin, meet https://unetbootin.github.io.
- You lot'll need either a bare USB drive with at least eight GB of space to create install media. Whatsoever data on the USB drive will be erased during this procedure.^[3]
- For help installing software on Ubuntu, see How to Install Software in Ubuntu.
2
Go to https://www.microsoft.com/en-us/software-download/windows10 in a spider web browser. If you don't already have a bootable Windows DVD or USB bulldoze, you tin create a one from a downloadable ISO.
- You must have a license to install Windows 10. This means y'all should have already purchased Windows 10 and have a valid product key.
3

Select the latest version of Windows 10 and click Confirm . Additional options will aggrandize at the bottom of the page.
4

Select a language and click Confirm . You'll choose the linguistic communication from the drop-down menu below "Select the product linguistic communication."
5

Click 32-bit Download or 64-flake Download . This downloads the ISO to your default download location.
half dozen

Open up UNetbootin and insert your USB bulldoze. Opening UNetbootin displays the welcome screen where you lot can choose your bootable drive parameters.
seven

Select the "DiskImage" radio push button. It's toward the bottom-left corner of the window.
8

Select ISO from the "DiskImage" menu. It's to the right of the radio button.
9

Click the three-dot … button. This opens your file browser.
10

Select the file you just downloaded from Microsoft. It's the one that ends with .iso.
eleven

Select USB Drive from the "Type" menu. It's at the bottom-left corner of the window.
12
Select your USB drive from the "Drive" carte du jour. This is the device characterization for your USB drive.
- If you can't select your USB drive, it likely needs to be formatted to the FAT32 file organization. You tin do this in the file manager by correct-clicking the USB drive and selecting Format.^[4]
13

Click OK . This creates a bootable Windows ten USB drive from the downloaded ISO epitome. In one case the bulldoze is gear up, y'all'll run into "Installation Complete."
14

Click Exit to close UNetbootin.

Advertisement

one
Restart your reckoner into the BIOS/UEFI. The steps to enter the BIOS/UEFI depend on your PC manufacturer and model. Yous'll ordinarily have to printing a certain primal (often F2 , F10 , F1 , or Del ) correct after the computer starts boot up.
- Insert the USB drive into a free USB port if you haven't already.
2

Set the USB drive to come up first in the boot society. Yous'll normally do this in a menu called "Boot" or "Boot Social club." The steps to do this vary by PC, but yous'll commonly accept to select USB Bulldoze and marker it every bit 1st Boot Device. Cheque your PC manufacturer's website for more specific instructions about your BIOS/UEFI.
3

Save your changes and exit the BIOS/UEFI. Most BIOS/UEFI make the "Save" and "Exit" keys very clear somewhere on the screen. Once you exit the BIOS/UEFI, your figurer will kicking from your USB drive and display the "Windows Setup" window.
4

Click Custom: Install Windows just (advanced) . It'due south the 2d option on the window. A list of partitions will appear.
five

Select the Windows10 sectionalization and click Side by side . This is the partition you just created. Windows will now install on the selected partition.
6

Follow the on-screen instructions to install Windows. Once y'all finish the setup, you'll boot to the Windows desktop.
vii

Advertisement

1

Open up the Microsoft Edge web browser. You'll detect it in Start menu, which is at the lesser-left corner of the screen. The final part of the procedure is setting up your computer to let you boot from either Windows ten or Ubuntu at commencement up.
two

Navigate to https://neosmart.net/EasyBCD. EasyBCD is a free tool that lets you ready dual-boot from within Windows.
3

Scroll down and click Annals under "Not-commercial." This brings y'all to a sign-upwardly page.
4

Enter your proper noun and e-mail address and click Download . This should start the download immediately, but you might accept to click Salve or Download to ostend.
5

Click the file you merely downloaded. Information technology'south the file that starts with EasyBCD. You lot should see information technology near the bottom of the browser. If you don't, press Ctrl+J to open the Downloads list and click information technology there.
6

Click Yes to permit the app to run.
7

Follow the on-screen instructions to install EasyBCD. One time the app is installed, it will be added to the Offset menu.
8

Open up EasyBCD. It'southward on the Starting time carte du jour, which you lot can get to by clicking the Windows button at the bottom-left corner of the screen.
nine

Click the Linux/BSD tab. Information technology'due south near the top of the app.
10

Select Grub 2 from the "Type" menu. It's near the acme of the tab.
11

Type Ubuntu into the "Name" field. It's right below the "Blazon" menu. This is how Ubuntu will appear in the boot bill of fare.
12

Select Automatically locate and load from the "Drive" menu.
13

Click the Add Entry push button. Information technology'due south right below the "Drive" carte. This adds an option for Ubuntu to the standard Windows boot menu.^[five]
14

Remove the USB drive and restart the PC. You can restart the PC by clicking the Start carte, selecting the Power push button (it looks like a knob), and choosing Restart. When the PC comes back up, information technology will boot to a screen that allows you to select either Windows 10 or Ubuntu. Selecting one or the other will kick into that operating organization.

Advertisement

Inquire a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Virtually This Commodity

Article Summary Ten

1. Create a primary NTFS partition in Ubuntu.
two. Download the Windows 10 ISO from Microsoft.
3. Install UNetbootin from the Software Center.
iv. Use UNetbootin to create a bootable USB Windows 10 drive.
5. Boot from the USB drive.
6. Follow the on-screen instructions to install Windows.
vii. Connect to the internet and download EasyBCD.
viii. Employ EasyBCD to add Ubuntu to the boot menu.

Did this summary help y'all?

Thanks to all authors for creating a page that has been read 174,622 times.